Asuswrt Binding

This binding adds support to read information from ASUS-Routers (Copyright © ASUS).

Discovery

The ASUS routers are discovered through UPnP in the local network. After adding a discovered router it is required to configure the username and password to use it.

Supported Things

This binding supports ASUS routers with Asuswrt or Asuswrt-Merlin (opens new window) firmware. Firmware 5.x.x (some DSL models) is NOT supported (not Asuswrt).

ThingType	Name	Descripion
bridge	router	Router to which the binding connects
-	interface	Network interface of the router
-	client	Client is connected to the bridge

router Thing Configuration

Name	Type	Description	Default	Required	Advanced
hostname	text	Hostname or IP address of the device	router.asus.com (opens new window)	yes	no
username	text	Username to access the device	N/A	yes	no
password	text	Password to access the device	N/A	yes	no
useSSL	boolean	Connect over SSL or use http://	false	no	no
refreshInterval	integer	Interval the device is polled in sec.	20	no	yes
httpPort	integer	HTTP-Port	80	no	yes
httpsPort	integer	HTTPS-Port	443	no	yes

interface Thing Configuration

Name	Type	Description	Default	Required	Advanced
interfaceName	text	options name of interface (wan/lan)	N/A	yes	no

client Thing Configuration

Name	Type	Description	Default	Required	Advanced
macAddress	text	Unique MAC address of the device	N/A	yes	no
clientNick	text	Nickname used by OH	N/A	no	no

Properties

All devices support some of the following properties:

property	description	things supporting this channel
vendor	Vendor of device	router, client
dnsName	DNS name of device	router, client

Channels

All devices support some of the following channels:

group	channel	type	description	things supporting this channel
network-info	mac-address	text (RO)	HW address	interface, client
	ip-address	text (RO)	IP address	interface
	ip-method	text (RO)	IP method (static/dhcp)	interface, client
	subnet	text (RO)	Subnetmask	interface
	gateway	text (RO)	Default gateway	interface
	dns-servers	text (RO)	DNS servers	interface
	network-state	Switch (RO)	Client is online	interface, client
	internet-state	Switch (RO)	Client connected to Internet	client
sys-info	mem-total	Number:DataAmountype	Total memory in MB	router
	mem-used	Number:DataAmountype	Used memory in MB	router
	mem-free	Number:DataAmountype	Free memory in MB	router
	mem-used-percent	Number:Dimensionles	Used memory in %	router
	cpu-used-percent	Number:Dimensionles	Total CPU usage in percent over all cores	router
client-list	known-clients	text (RO)	Known clients with name and MAC addresses	router
	online-clients	text (RO)	Online clients with name and MAC addresses	router
	online-macs	text (RO)	List with MAC addresses of online clients	router
	online-clients-count	Number:Dimensionless	Count of online clients	router
traffic	current-rx	Number:DataTransferRate	Current DataTransferRate MBits/s (receive)	interface, client
	current-tx	Number:DataTransferRate	Current DataTransferRate MBits/s (send)	interface, client
	today-rx	Number:DataAmount	Data received since 0:00 a clock in MB	interface, client
	today-tx	Number:DataAmount	Data sent since 0:00 a clock in MB	interface, client
	total-rx	Number:DataAmount	Data received since reboot in MB	interface, client
	total-tx	Number:DataAmount	Data sent since reboot in MB	interface, client

Events

All devices support some of the following Events:

group	event	kind	description	things supporting this event
network-info	connection-event	Trigger	Fired if connection is established ('connected') or ('disconnected')	interface
	client-online-event	Trigger	Fired if client leaves ('gone') or enters ('connected') the network	client
client-list	client-online-event	Trigger	Fired if client leaves ('gone') or enters ('connected') the network	router

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)