GROHE ONDUS Binding

The GROHE ONDUS Binding provides access to data collected by a GROHE ONDUS appliance, such as an GROHE Sense Guard (opens new window). The binding uses the REST API interface (the same as used by the Android App) to retrieve the collected data.

Supported Things

This binding should support all appliances from GROHE, however, only the GROHE Sense and Sense Guard is tested with it.

Thing type	Name
account	GROHE ONDUS Account
senseguard	GROHE SENSE Guard device
sense	GROHE SENSE device

Discovery

The binding requires you to create at least one Account thing as a bridge manually. The discovery process will look through all locations and rooms of your configured GROHE account and adds each found appliance as a new thing automatically to the inbox.

Binding Configuration

This binding does not require any configuration outside of things.

Thing Configuration

There is only one thing and one bridge that needs to be configured together to get this binding to work, see the full example section for a self-explaining example.

Account Bridge

The groheondus:account bridge is used to configure the API interface for a specific account, which is used to access the collected and saved data of your GROHE account. Use the same credentials as in the mobile app.

Appliance

The groheondus:sense and groheondus:senseguard things are used to retrieve information of a specific appliance from GROHE. This appliance needs to be connected with your GROHE ONDUS account as configured in the corresponding Account Bridge. The appliance needs to be configured with the unique appliance ID (with the applianceId configuration) as well as the roomId and the locationId. Once the account bridge is configured, the appliances in your account will be discovered as Appliance things. pollingInterval has a minimum value of 900 seconds to avoid service rate limiting.

Configuration	Default value	Description
applianceId	''	Unique ID of the appliance in the GROHE ONDUS account
roomId	''	ID of the room the appliance is in
locationId	''	ID of the location (building) the appliance is in
pollingInterval	Retrieved from API,	Interval in seconds to get new data from the API
	usually 900	The sense thing uses 900 by default.

Channels

senseguard

Channel	Type	Description
name	String	The name of the appliance
pressure	Number:Pressure	The pressure of your water supply
temperature_guard	Number:Temperature	The ambient temperature of the appliance
valve_open	Switch	Valve switch
waterconsumption	Number:Volume	The amount of water used in a specific timeframe
waterconsumption_since_midnight	Number:Volume	The amount of water used since midnight

sense

Channel	Type	Description
name	String	The name of the appliance
humidity	Number:Dimensionless	The humidity measured by the appliance
temperature	Number:Temperature	The ambient temperature of the appliance
battery	Number	The battery level of the appliance

Note: Be aware that the Sense reports data once a day (at most), and that the value posted in the channel - however the latest - may be up to 48 hours old.

Full Example

Things file:

Bridge groheondus:account:account1 [ username="[email protected]", password="YourStrongPasswordHere!" ] {
    groheondus:senseguard:550e8400-e29b-11d4-a716-446655440000 [ applianceId="550e8400-e29b-11d4-a716-446655440000", roomId=456, locationId=123 ] {
        Channels:
            Type number : waterconsumption [
               timeframe=3
            ]
    }
    groheondus:sense:550e8400-e29b-11d4-a716-446655440000 [ applianceId="444e8400-e29b-11d4-a716-446655440000", roomId=456, locationId=123 ]
}

Items file:

String Name_Sense_Guard "Appliance Name" {channel="groheondus:senseguard:groheondus:appliance:550e8400-e29b-11d4-a716-446655440000:name"}
Number:Pressure Pressure_Sense_Guard "Pressure [%.1f %unit%]" {channel="groheondus:senseguard:groheondus:appliance:550e8400-e29b-11d4-a716-446655440000:pressure"}
Number:Temperature Temperature_Sense_Guard "Temperature [%.1f %unit%]" {channel="groheondus:senseguard:groheondus:appliance:550e8400-e29b-11d4-a716-446655440000:temperature_guard"}
Number:Volume Water_Usage_Since_Midnight_Sense_Guard "Water usage since midnight [%.1f %unit%]" {channel="groheondus:senseguard:groheondus:appliance:550e8400-e29b-11d4-a716-446655440000:waterconsumption_since_midnight"}

String Name_Sense "Temperature [%.1f %unit%]" {channel="groheondus:sense:groheondus:appliance:444e8400-e29b-11d4-a716-446655440000:name"}
Number:Temperature Temperature_Sense "Temperature [%.1f %unit%]" {channel="groheondus:sense:groheondus:appliance:444e8400-e29b-11d4-a716-446655440000:temperature"}
Number Humidity_Sense "Humidity [%.1f %unit%]" {channel="groheondus:sense:groheondus:appliance:444e8400-e29b-11d4-a716-446655440000:humidity"}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)