This page is part of archived documentation for openHAB 4.3. Go to the current stable version
# Haas Sohn Pellet Stove Binding
The binding for Haassohnpelletstove communicates with a Haas and Sohn Pelletstove through the optional WIFI module. More information about the WIFI module can be found here: https://www.haassohn.com/de/ihr-plus/WLAN-Funktion (opens new window)
# Supported Things
| Things | Description | Thing Type |
|---|---|---|
| haassohnpelletstove | Control of a Haas & Sohn Pellet Stove | oven |
# Thing Configuration
In general two parameters are required. The IP-Address of the WIFI-Modul of the Stove in the local Network and the Access PIN of the Stove. The PIN can be found directly at the stove under the Menue/Network/WLAN-PIN
Thing haassohnpelletstove:oven:myOven "Pelletstove" [ hostIP="192.168.0.23", hostPIN="1234"]
# Channels
The following channels are yet supported:
| Channel | Type | Access | Description |
|---|---|---|---|
| power | Switch | read/write | Turn the stove on/off |
| channelIsTemp | Number:Temperature | read | Receives the actual temperature of the stove |
| channelSpTemp | Number:Temperature | read/write | Receives and sets the target temperature of the stove |
| channelMode | String | read | Receives the actual mode the stove is in like heating, cooling, error, .... |
| channelEcoMode | Switch | read/write | Turn the eco mode of the stove on/off |
| channelIngitions | Number | read | Amount of ignitions of the stove |
| channelMaintenanceIn | Number:Mass | read | States the next maintenance in kg |
| channelCleaningIn | String | read | States the next cleaning window in hours:minutes as string |
| channelConsumption | Number:Mass | read | Total consumption of the stove |
| channelOnTime | Number | read | Operation hours of the stove |
# Full Example
demo.items:
Number:Temperature isTemp { channel="oven:channelIsTemp" }
Number:Temperature spTemp { channel="oven:channelSpTemp" }
String mode { channel="oven:channelMode" }
Switch power { channel="oven:power" }
# Google Assistant configuration
See also: https://www.openhab.org/docs/ecosystem/google-assistant/ (opens new window)
googleassistantdemo.items
Group g_FeuerThermostat "FeuerThermostat" {ga="Thermostat" }
Number StatusFeuer "Status Feuer" (g_FeuerThermostat) { ga="thermostatMode" }
Number ZieltemperaturFeuer "ZieltemperaturFeuer" (g_FeuerThermostat) {ga="thermostatTemperatureSetpoint"}
Number TemperaturFeuer "TemperaturFeuer" (g_FeuerThermostat) {ga="thermostatTemperatureAmbient"}
# Tested Hardware
The binding was successfully tested with the following ovens:
- HSP 7 DIANA
- HSP6 434.08