This page is part of archived documentation for openHAB 4.3. Go to the current stable version
# LiquidCheck Binding
This binding is for the Liquid-Check device from SI-Elektronik GmbH which can be used to measure level and content of tanks.
# Supported Things
liquidCheckDevice:
The Liquid-Check device in Hardwareversion B and Firmwareversion 1.60 has been tested and is working. You can access the measured data, raw data, the settings as properties and command a measurement.
# Discovery
This binding discovers the devices via a ping and request method. It uses every Ethernet/WLAN interface that is connected to the openHAB server. Therefore the discovery has to be manually triggered.
# Thing Configuration
You only need to set the IP address of the device or use the discovery method. If the maximum content has not been set the fill-indicator channel will not contain valid values.
# liquidCheckDevice Thing Configuration
| Name | Type | Description | Default | Required | Advanced |
|---|---|---|---|---|---|
| hostname | text | Hostname or IP address of the device | N/A | yes | no |
| maxContent | integer | Maximal content of the container | 1 | no | no |
| refreshInterval | integer | Interval the device is polled in seconds | 60 | no | yes |
| connectionTimeout | integer | Timeout after a request has been sent | 5 | no | yes |
# Channels
| Channel | Type | Read/Write | Description |
|---|---|---|---|
| content | Number:Volume | R | This is the measured content |
| level | Number:Length | R | This is the measured level |
| raw-content | Number:Volume | R | This is the measured raw content data |
| raw-level | Number:Length | R | This is the measured raw level data |
| fill-indicator | Number:Dimensionless | R | This is the fill level in percentage |
| measure | Switch | W | This starts a measurement |
| pump-runs | Number | R | This is the total runs number |
| pump-runtime | Number:Time | R | This is the total runtime in sec. |
# Full Example
# Thing
Thing liquidcheck:liquidCheckDevice:myDevice "Label" @ "Location" [hostname="XXX.XXX.XXX.XXX", maxContent=9265, refreshInterval=600, connectionTimeout=5]
# Items
Number:Volume ContentLiquidCheck "Content" {liquidcheck:liquidCheckDevice:myDevice:content}
Number:Length LevelLiquidCheck "Level" {liquidcheck:liquidCheckDevice:myDevice:level}
Number:Volume RawContentLiquidCheck "Raw Content" {liquidcheck:liquidCheckDevice:myDevice:raw-content}
Number:Length RawLevelLiquidCheck "Raw Level" {liquidcheck:liquidCheckDevice:myDevice:raw-level}
Number:Dimensionless FillIndicator "Fill Indicator" {liquidcheck:liquidCheckDevice:myDevice:fill-indicator}
Switch MeasureLiquidCheck "Measure" {liquidcheck:liquidCheckDevice:myDevice:measure}
Number PumpRuns "Pump runs" {liquidcheck:liquidCheckDevice:myDevice:pump-runs}
Number PumpRuntime "Pump runtime" {liquidcheck:liquidCheckDevice:myDevice:pump-runtime}
← Linux Input LIRC →