This page is part of archived documentation for openHAB 4.3. Go to the current stable version
# SNCF Binding
The SNCF binding provides real-time data(*) for each train, bus, tramway... station in France. This is based on live API provided by DIGITALSNCF.
Get your API key on DIGITALSNCF web site (opens new window)
Note : SNCF Api is based on the open API Navitia (opens new window). This binding uses a very small subset of it, restricted to its primary purpose.
(*) According to DIGITALSNCF Transilien may only be available for schedule, maybe not real-time.
# Supported Things
Bridge: The binding supports a bridge to connect to the [DIGITALSNCF service](https://www.digital.sncf.com/startup/api/token (opens new window) developpeur). A bridge uses the thing ID "api".
Station: Represents a given bus, train station.
Of course, you can add as many stations as needed.
# Discovery
This binding takes care of auto discovery. This method is strongly recommended as it is the only way to get proper station ID depending upon transportation type.
To enable auto-discovery, your location system setting must be defined. Once done, at first launch, discovery will search every station in a radius of 2000 m around the system, extending it by step of 500 m until it finds a first set of results. Every following manual successive launch will extend this radius by 500 m, increasing the number of stations discovered.
# Binding Configuration
The binding has no configuration options, all configuration is done at Thing level.
# Bridge Configuration
The bridge configuration only holds the api key :
| Parameter | Description |
|---|---|
| apiID | API ID provided by the DIGITALSNCF service. Mandatory. |
# Thing Configuration
The 'Station' thing has only one configuration parameter:
| Parameter | Description |
|---|---|
| stopPointId | Identifier of the station in the DIGITALSNCF network. |
The thing will auto-update depending on the timestamp of the earliest event detected to trigger (arrival or departure).
# Channels
The Station thing holds two groups of channels (arrivals and departures) containing these channels:
| Channel ID | Item Type | Description |
|---|---|---|
| direction | String | The direction of the route |
| lineName | String | Commercial name of the line |
| name | String | Name of the line |
| network | String | Name of the network ruling the line |
| timestamp | DateTime | Timestamp of the event (departure, arrival) |
# Full Example
sncf.things:
Bridge sncf:api:8901d44a68 "Bridge" [apiID="xxx-yyy-zzz"] {
station MyHouse "Krakow"[stopPointId="stop_point:SNCF:87561951:Bus"]
}
sncf.items:
String Arrival_Direction { channel="sncf:station:8901d44a68:87381475_RapidTransit:arrivals#direction" }
String Arrival_Line { channel="sncf:station:8901d44a68:87381475_RapidTransit:arrivals#lineName" }
DateTime Arrival_Time { channel="sncf:station:8901d44a68:87381475_RapidTransit:arrivals#timestamp" }
String Departure_Direction { channel="sncf:station:8901d44a68:87381475_RapidTransit:departures#direction" }
String Departure_Line { channel="sncf:station:8901d44a68:87381475_RapidTransit:departures#lineName" }
DateTime Departure_Time { channel="sncf:station:8901d44a68:87381475_RapidTransit:departures#timestamp" }