Somfy myLink Binding

This binding supports the Somfy myLink (opens new window) device for control of Somfy RTS blinds/shades.

Supported Things

Currently these things are supported:

• bridge (Somfy MyLink bridge, which can discover roller shades and scenes)
• roller shades (UP, DOWN, STOP control of a roller shade).

This binding has been tested with myLink firmware 5.23.

Discovery

To use auto discovery first setup a Somfy MyLink bridge, then supply its IP address and system id. The system id can be found in the integration settings -> Control4 section of your My Link app. Once the Somfy MyLink bridge is ONLINE you can start a scan that will detect and add to your Inbox any discovered roller shades.

Thing Configuration

mylink

Parameter	Parameter ID	Required/Optional	Description
IP or Hostname	ipAddress	Required	Hostname or IP Address of the myLink device
System Id	systemId	Required	The system id configured on the myLink device

shade

Parameter	Parameter ID	Required/Optional	Description
Target ID	targetId	Required	Address of shade in the Somfy system

scene

Parameter	Parameter ID	Required/Optional	Description
Scene ID	sceneId	Required	Address of scene in the Somfy system

Channels

The following channels are supported by the binding. Note that specific weather station models may support only some or all of these channels.

Channel ID	Item Type	Description
shadeControl	Rollershutter	Device control (UP, DOWN, STOP)
scenelist	String	Comma-separated list of scenes of form sceneId=sceneName
button	Switch	Button to trigger a scene or rule

Example

Things

Bridge somfymylink:mylink:mylink1 "myLink Bridge" @ "Office" [ ipAddress="192.168.1.1", systemId="mysystemidhere" ] {
    Thing shade shade1 "Living Room" [ targetId="CC114A21.1" ]
}

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)